Place of Origin :
China
Rated power voltage :
3-phase 1140V, 2300V, 50-60Hz±5%, voltage imbalance rate <3%
Rated voltage :
Maximum output voltage is the same as the input power supply voltage
Rated current :
Continuous operation at 100% rated current
Overload capacity :
150% rated current for 1 minute, 180% rated current for 2 seconds
Output frequency :
0Hz ～ 600Hz ，can set
Control method :
VVVF control with optimized PWM and standard PWM options, vector control, V/F control
Frequency resolution :
Digital setting: 0.01Hz
Starting frequency :
0Hz ～ 10Hz
Torque boost :
Torque boost 0.0% ～ 20.0%
V/F waveform :
Five modes: constant torque V/F curve, one mode of user-defined multi-segment V/F curve, and three modes of torque reduction characteristic curves (2.0 power, 1.7 power, and 1.3 power)
Acceleration and deceleration curve :
Two modes: linear acceleration/deceleration and S-curve acceleration/deceleration; two types of acceleration/deceleration time, with a maximum time of 3000 seconds
DC braking :
DC brake start frequency: 0-15.00Hz Brake time: 0-60.0 seconds Brake current: 0-150%
Multi-speed operation :
Implement multi-segment speed operation through built-in PLC or control terminals
Automatic Voltage Regulation (AVR) :
Maintain a constant output voltage when the grid voltage changes by 10%
Automatic energy-saving operation :
Automatically optimize the V/F (Voltage/Frequency) curve based on the load condition
Communication function :
Equipped with an RS485 standard communication interface, supporting MODBUS
Operation order channel :
LED keyboard, control terminals, serial port (RS485)
Frequency setting channel :
LED keyboard, simulated potentiometer, LED keyboard with ▲ and ▼ keys,NO.assignment for function codes, serial port, UP/DOWN terminals, analog voltage/current, combined setting
Digital input channel :
2 channels for start-stop control terminals, 6 channels for programmable digital inputs
Analog input channel :
2 channels of analog signal input: 2 channels switchable between 0-10V and 0/4-20mA
Digital output channel :
2 channels of open-collector output, 2 channels of relay output
Analog output channel :
2 channels analog signal output: 2 channels switchable between 0-10V and 0/4-20mA
LED display :
Can display or set inverter parameter
Protect function :
It offers multiple protection functions, including short circuit, overcurrent, overload, underload, overvoltage, undervoltage, phase loss, overheating, external fault, PID feedback disconnection, and 485 disconnection protection functions
Optional accessories :
Optional accessories Touch screen, control room
Application :
Indoor, shielded from direct sunlight, free from dust, corrosive gases, oil mist, water vapor, etc.
Altitude :
Below 1000 meters (operation at altitudes above 1000 meters may requirederating)
Environment tempreture :
- 10℃~+ 40℃
Humidity :
Less than 90% relative humidity, no condensation
Vibration :
Less than 5.9m/sec2（0.6G）
Storage tempreture :
- 20℃~+ 60℃
IP degree :
IP20
Cooling method :
Forced air cooling
Installation method :
Wall-mounted or floor-standing
Contact Now
